Standard Kitchen Unit Sizes and How to Plan Storage

Standard kitchen unit sizes run from 300mm to 1000mm wide for base cabinets, at a depth of 560mm to 600mm. The finished worktop sits at around 900mm. Those increments govern almost every kitchen layout, which is why it pays to know them before you start planning.

At Mayfair Kitchens we read those dimensions against how the room will actually be used. A cupboard that fits a gap is not automatically the best use of it, because drawers, larders, appliances, and everyday access all change the answer.

Standard Kitchen Unit Sizes at a Glance

Most cabinetry follows a consistent set of measurements, and widths vary far more than depths or heights. Individual ranges differ, so treat these as starting points.

  •     Base unit widths: 300mm to 1000mm, usually in 100mm increments
  •     Base unit depth: 560mm to 600mm before the worktop overhang
  •     Worktop depth: around 600mm, or 650mm for deeper runs
  •     Finished worktop height: around 900mm
  •     Plinth height: around 150mm
  •     Wall unit depth: 300mm to 350mm
  •     Wall unit heights: 575mm to 900mm
  •     Tall and larder units: 1950mm to 2300mm, with 2150mm a common choice
  •     Pull-out larder width: commonly 300mm or 400mm
  •     Corner base unit: around 900mm by 900mm

Base Units

Base units carry the worktop and do most of the work. The carcass is typically 720mm tall on 150mm legs, which is how the worktop arrives at 900mm.

Standard kitchen unit sizes and what each width holds

A 300mm cabinet suits trays, bottles, or a slim pull-out, though the narrow opening makes it awkward for bulky cookware. The 600mm unit is the workhorse of any kitchen. It takes a sink, a drawer stack, or most integrated appliances, which are built to that width for exactly this reason.

Wider units come into their own for pans and crockery, especially fitted with drawers rather than doors. But wider does not always mean more useful. A very wide cupboard with deep shelves becomes somewhere things get stacked and forgotten, so internal fittings matter as much as external size.

If an island is part of your plan, our guide to kitchen island dimensions covers how depth, seating, and circulation change the sums.

Wall Units

Wall units run 300mm to 350mm deep and 575mm to 900mm high. The shallow depth protects headroom, and cabinets that are too deep make the prep area feel closed in.

Height is the more interesting decision. Taller units reach closer to the ceiling and claim storage from a part of the room that usually goes unused. The cost is accessibility, so plan by frequency of use. Everyday glasses, mugs, and ingredients belong within comfortable reach, and the rest can go up.

Tall Units, Larders and Pantries

Tall units usually measure 1950mm to 2300mm high and around 600mm wide, while narrow pull-out larders come in at 300mm or 400mm. Using the full height of the room is the most efficient way to add storage.

Pull-out larders work because the contents come out to you. A 400mm unit looks narrow from the front, yet a good pull-out makes the whole depth reachable from both sides. A fixed cupboard of the same volume hides half its contents at the back.

Drawers Versus Cupboards

Below worktop height, drawers win. The contents come out towards you rather than needing to be reached around. The most comfortable zone in any kitchen sits roughly between 600mm and 1400mm from the floor.

Pan drawers show the point clearly. Internal depths are typically around 140mm for shallower items, 200mm for plates and general cookware, and 280mm for larger pans and stock pots. A deep drawer holds several pans while keeping all of them visible from above.

Cupboards still earn their place for tall or awkward items and anything you use rarely. Most kitchens want both: drawers for daily storage, cupboards for whatever does not suit a fixed depth.

Solving Corners

A corner base unit of around 900mm by 900mm holds a lot, but very little of it is easy to reach with fixed shelves. Carousels rotate the contents towards the opening, while pull-out mechanisms bring baskets clear of the cabinet altogether.

Both improve access, and both use some of the space for the mechanism. Sometimes the sensible call is to accept the corner will never be maximum storage and put the effort into the cabinets around it. Good kitchen layout planning matters more than squeezing every millimetre from a difficult corner.

Where Standard Sizes Stop Working

Standard units suit straight walls and predictable dimensions. They get restrictive in period properties and any room where the nearest standard width leaves an unusable gap.

Walls out of square, chimney breasts, alcoves, and sloping ceilings all create the same problem. Standard cabinetry fills those spaces with blank panels, which is fine for one small gap. When the compromises stack up across a whole kitchen, made to measure cabinetry uses the room you actually have instead of the nearest increment, vertically as well as horizontally. That is where bespoke design earns its keep, and it is more about solving dimensions than decorative detail.

Frequently Asked Questions

What are standard kitchen unit sizes?

Base cabinets usually run 300mm to 1000mm wide at 560mm to 600mm deep. Wall units are around 300mm to 350mm deep, and tall units commonly stand between 1950mm and 2300mm high.

How deep is a standard kitchen base unit?

Around 560mm to 600mm before the worktop overhang. A standard worktop is roughly 600mm deep, with 650mm used for deeper runs.

What is the standard kitchen worktop height?

Approximately 900mm, made up of a 720mm carcass, 150mm legs and plinth, and the worktop itself. The exact height varies with the cabinetry and specification.

How wide is a larder unit?

Tall larders are often 600mm wide, while narrow pull-out versions come in 300mm or 400mm. The right size depends on how much you store and what the room allows.

Are drawers better than cupboards in a kitchen?

Below worktop height, usually yes, because the contents come out to you rather than needing to be reached around. Cupboards still suit tall or unusually shaped items, so most kitchens use both.

What is the best way to use a corner kitchen unit?

Carousel and pull-out mechanisms both beat fixed shelves for access. Each uses some internal space, so the choice is between easier reach and maximum volume.

Plan Storage Around Your Room

Storage works when cabinetry is planned around the room and the way you cook, not by filling the walls with standard units. We look at width, depth, access, appliances, and corners together, so the kitchen works in use as well as on paper.

Founded in 1983, Mayfair Kitchens has over 40 years of experience designing kitchens across Cheshire, Wirral, and the surrounding areas. If you are choosing a sink too, our guide to kitchen sink sizes covers the base unit widths each one needs, and planning a kitchen renovation covers the wider decisions.

Visit Mayfair Kitchen Studio at our Cheshire Oaks or Tarporley showroom to see cabinetry, larders, and drawer systems in person.

Arrange a design consultation with Mayfair Kitchens to plan storage around the dimensions of your room.

Kitchen Sink Sizes and Taps: What to Specify

Kitchen sink sizes start with the cabinet underneath. A single bowl usually needs a 600mm base unit, a 1.5 bowl needs 800mm to 1000mm, and a double bowl needs 1000mm or wider.

At Mayfair Kitchens we settle this early, because a sink chosen after the cabinetry has been made will always cost you something. Usually storage. Sometimes worktop space, and occasionally both.

Kitchen Sink Sizes and Base Unit Widths

Your bowl configuration sets the cabinet width:

  •     Single bowl: 600mm base unit. The most common choice, and the most efficient use of a cabinet run.
  •     1.5 bowl: 800mm to 1000mm, depending on the bowl sizes and whether a drainer is built in.
  •     Double bowl: 1000mm or wider. Two full bowls use up a lot of storage.
  •     Belfast: purpose-built cabinet. A standard carcass will not take one, since the exposed ceramic front needs its own support.

Depth is a separate decision. Around 180mm to 200mm suits most households, while deeper bowls reach roughly 250mm and take larger pans comfortably. The trade-off is that the base of the sink sits further away, which not everyone finds easy to work at. Choose for what actually goes in the sink rather than for the biggest bowl available.

Kitchen sink sizes and what fits underneath

External dimensions are only half the picture. Clips, waste fittings, pipework, and tap connections all take room inside the cabinet, and whatever is left has to hold everything else you planned to store there.

Bins are the usual casualty. A pull-out has to clear the bowl and the plumbing before it will work at all, and adding a water filter or a boiling water tank swallows whatever space remains. A sink that technically fits can still be the wrong specification.

Standard units leave you working in fixed widths. Made to measure cabinetry lets the designer use the space you actually have, which matters most when the sink, plumbing, bins, and tap equipment are all competing for one cupboard.

Undermount, Inset or Belfast?

What separates them is how they meet the worktop, so establish your worktop material first.

Undermount sinks sit below the worktop, leaving the cut edge visible around the opening. Crumbs and water go straight off the surface into the bowl, which is the main appeal. The catch is that they need a solid, water-resistant material whose cut edge can be finished properly. Standard laminate will not do, because cutting through it exposes the substrate underneath. Settle the worktop material before you commit to an undermount sink, and our guide to worktop materials and cabinet choices covers which surfaces suit one.

Inset sinks drop in from above. The rim sits on the worktop and covers the cut edge, so they work across far more materials, and many come with a built-in drainer.

Belfast sinks are deep ceramic bowls with an exposed front. Their weight and shape mean the cabinet has to be built around them, and the worktop is templated to fit once the sink is in place.

Choosing a Tap

Start with tap holes. Kitchen taps use one, two, or three depending on the design, so nothing should be drilled until the exact tap is confirmed.

Spout reach comes next. Water should land in the middle of the bowl rather than against the back edge or straight onto the waste. A tall spout makes filling pans easier but needs clearance above, and if the sink sits beneath a window, check the tap does not block it from opening.

Water pressure matters more than the tap

Choosing a tap on looks alone is the quickest route to disappointing flow. Low-pressure taps work from around 0.2 to 0.3 bar and suit gravity-fed systems. Higher-pressure taps often need 1.0 bar or more, which is typical of combi and unvented systems.

Fit a high-pressure tap to a system that cannot supply it and you get a weak trickle. Replacing it afterwards is an avoidable cost, and checking the water system during the technical survey stage takes minutes.

Boiling water taps need the same forethought. They free up worktop space by replacing the kettle, but the tank is roughly a 300mm cube and sits in the sink cabinet alongside a socket and sometimes filters. Allow for it before you plan the storage, and leave yourself access for filter changes.

Positioning the Sink

Allow at least 300mm of landing space either side where the room permits, and keep the dishwasher next to the sink. Plates can then be scraped and loaded without anyone crossing the kitchen, and the plumbing stays simpler.

A sink in an island brings plumbing routes and lost storage into play. Our guide to kitchen island dimensions covers the clearances and seating allowances you will need to plan around.

Where washing, prep, and cooking share the same part of the room, plan the ventilation and extraction at the same time rather than afterwards.

Frequently Asked Questions

What size kitchen sink do I need?

It depends on the cabinet beneath it. A single bowl commonly needs a 600mm base unit, a 1.5 bowl needs 800mm to 1000mm, and a double bowl needs 1000mm or wider.

What is the difference between an undermount and inset sink?

An undermount sink fixes below the worktop, leaving the cut edge visible around the bowl. An inset sink fits from above, with a rim that sits on the worktop and covers the opening.

Can you fit an undermount sink to a laminate worktop?

Standard laminate is not suited to a conventional undermount sink, because cutting the opening exposes the substrate beneath. Undermount sinks suit materials whose cut edges can be finished properly.

How many tap holes does my sink need?

One, two, or three, depending on the tap design. Confirm the exact tap specification before the sink or worktop is drilled.

Why is my new kitchen tap running slowly?

This usually happens because the tap needs more pressure than your property can supply. Check the tap specification against your water system before buying.

Do boiling water taps take up cabinet space?

Yes. The tank is around a 300mm cube and needs a power socket, sometimes with filtration alongside it, all inside the sink cabinet.

Specify Your Sink at the Design Stage

Sinks and taps look like finishing touches, but they drive cabinetry, worktop fabrication, plumbing, and storage. Specify them early and the rest of the kitchen does not have to adapt around them.

Founded in 1983, Mayfair Kitchens has over 40 years of experience designing kitchens across Cheshire, Wirral, and the surrounding areas. If your project involves wider building work, it is worth reading about planning a kitchen renovation first.

Visit Mayfair Kitchen Studio at our Cheshire Oaks or Tarporley showroom to see sinks, taps, worktops, and cabinetry together.

Arrange a design consultation with Mayfair Kitchens to start planning a kitchen around the way you use your home.